KENDi QUANDO DALI-2 Push-Button Dimmer Module (30300)

DALI-2 certified push dimmer module with a bus current draw under 2 mA, enabling smooth dimming and switching of DALI luminaires from a conventional momentary push button.

Overview

The KENDi QUANDO (30300) is a flush-mounted DALI-2 push dimmer module. It connects a standard push button to a DALI bus, allowing manual on/off switching and dimming control without additional power wiring. The module is powered directly from the DALI bus and consumes less than 2 mA, making it suitable for large installations.

What stands out

• DALI-2 certified for reliable interoperability
• Ultra-low bus current consumption (< 2 mA)
• Simple screw terminal connection for 0.5–1.5 mm² wires
• Supports push button cable lengths up to 50 m
• Compact flush-mounted design fits standard electrical boxes

Technical details

• Control protocol: DALI-2
• Device type: Push dimmer module
• Input: 1 conventional push button (momentary switch)
• Function: On/off switching, dim up/down
• Power supply: DALI bus powered
• DALI bus voltage range: 9.5–22.5 V DC
• DALI bus current consumption: < 2 mA
• Mounting: Flush-mounted in standard electrical boxes
• Terminal type: Screw terminals
• Wire cross section: 0.5–1.5 mm²
• Operating temperature: -20 °C to +50 °C
• Housing material: Polycarbonate (PC)
• Max push button cable length: 50 m
• Configuration: Via DALI controller software

Our verdict

A compact, bus-powered DALI-2 dimmer module that simplifies push button integration in DALI lighting systems.