Microconnect UTP602B network cable, blue, 2 m, Cat6 U/UTP (UTP)

MicroConnect UTP602B is a 2 m Cat6 U/UTP networking cable with RJ-45 connectors on both ends. The cable supports Cat6 performance up to 250 MHz and is suitable for home and small office networks, connecting devices such as switches, modems and routers or terminating into patch panels, keystone jacks and wall outlets. The blue cable provides a clear visual identification in structured cabling installations.

Advantages

The cable is backwards compatible with Cat5e and Cat5 standards and is rated for high-speed data transfer up to 10000 Mbit/s when used with compatible hardware. Molded boots (snaggles) protect the connector latches during installation in tight spaces and reduce strain on the RJ-45 plug. U/UTP construction provides balanced performance for typical Ethernet and multimedia applications.

Suitable for (tasks / use cases)

• Connecting computers, switches, routers and modems in home or small office networks
• Linking network equipment to patch panels or wall outlets
• Ethernet connections for streaming, gaming and VoIP where Cat6 performance is required

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Length: 2 m
• Connectors: RJ-45 to RJ-45
• Transmission: up to 10000 Mbit/s (depending on network hardware)
• Shielding: U/UTP
• Colour: Blue
• Weight: 0.076 kg
• Brand / MPN: MicroConnect UTP602B

How to use

Plug one RJ-45 connector into the network port of your device (for example a computer, switch or router) and the other connector into the corresponding port on the remote device, patch panel or wall outlet. Ensure connectors click into place and avoid sharp bends near the plugs. For best performance, use appropriate network equipment configured for Cat6 speeds and keep cable runs within recommended length limits for Ethernet links.

Recommendations

For stable high-speed connections, route the cable away from large electrical sources and avoid running alongside mains power cables. Replace the cable if the connector latch or cable sheath is damaged. Use the Cat6 cable for network segments where reduced crosstalk and support for higher frequencies (up to 250 MHz) are required.