Microconnect UTP630R Network Cable Red 30 m Cat6 U/UTP (UTP)

The Microconnect UTP630R RJ-45 Cat6 30 m Red is a 30-metre U/UTP Cat6 networking cable with RJ-45 connectors on both ends. Designed for reliable wired connections between devices such as switches, modems and routers or to structured cabling via patch panels, keystone jacks or wall outlets, this cable supports data rates up to 10000 Mbit/s and is tested to the Cat6 standard of 250 MHz. The cable is backward compatible with Cat5e and Cat5 and features latch protection to reduce the risk of connector damage during installation in confined spaces.

Advantages

The cable provides high-performance Cat6 transmission up to 250 MHz while maintaining compatibility with older Cat5e/Cat5 installations. Its RJ-45 connectors on both ends and U/UTP construction ensure stable signal transfer, and the integrated latch protection helps prevent connector breakage during installation. The 30 m length and bright red colour make it suitable for clearly marked permanent or temporary runs in home and small office networks.

Suitable for

• Connecting routers, modems and switches to patch panels or network outlets
• Home networks and small office LAN setups
• Audio/video and entertainment system wired connections
• Temporary or permanent cabling runs where a visible cable colour is desired

Key specifications

• Cable type: U/UTP Cat6
• Length: 30 m
• Connectors: RJ-45 — both ends
• Test frequency: up to 250 MHz (Cat6 standard)
• Maximum data rate: up to 10000 Mbit/s
• Compatibility: backward compatible with Cat5e and Cat5
• Colour: Red
• Weight: 0.916 kg
• Manufacturer part number (MPN): UTP630R
• EAN: 5705965905326

How to use

Uncoil the 30 m Microconnect Cat6 cable and route it between the two network endpoints you want to connect. Insert the RJ-45 connectors firmly into the respective ports on devices such as switches, routers or patch panels until the latch clicks. For installations in confined spaces, guide the cable carefully to avoid placing excessive stress on the connector; the latch protection reduces but does not eliminate the need for careful handling. Test the link after connection to confirm the negotiated speed and connectivity.

Recommendations

For best performance, avoid running the cable parallel to power lines for long distances and use proper cable management to prevent tight bends. When permanent installation is required, terminate the cable at a patch panel or keystone jack rather than leaving RJ-45 connectors exposed in-wall.