ACT AK3395 SATA connection cable with angled plug 0.75 m

The ACT SATA connection cable with angled connector AK3395 is a 0.75 m red SATA data cable with two SATA 7-pin connectors. It is designed to connect SATA storage devices such as SSDs and HDDs to motherboards or SATA controllers, providing reliable data transfer in systems where space is limited thanks to its angled connector on the drive side.

Advantages

The angled-down connector reduces strain on the drive connector and helps with cable routing in compact cases. With a 0.75 m length it balances reach and neat cable management. The standard SATA 7-pin connectors ensure compatibility with common SATA devices and controllers.

Suitable for

• Connecting 2.5" or 3.5" SSDs and HDDs to a motherboard
• Systems with limited internal clearance or tight cable paths
• Upgrading or replacing internal SATA data cables in desktop PCs

Key specifications

• Cable length: 0.75 m
• Connectors: SATA 7-pin to SATA 7-pin
• Connector orientation: angled down on the drive side
• Colour: Red
• Brand: ACT, MPN: AK3395, EAN: 8716065112443

How to use

Power off the computer and unplug it from the mains. Locate the SATA port on the motherboard and the SATA data port on the drive. Insert one SATA 7-pin connector into the motherboard SATA port and the angled connector into the drive’s SATA data port until the latch engages. Reassemble the system and power it on to verify the drive is detected by the BIOS or operating system.

Recommendations

For improved airflow and easier cable management, route the cable along drive bays or behind the motherboard tray where possible. Avoid excessive bending near the connectors and keep the cable clear of cooling fans and moving parts.