ACT Power cable CEE 7/7 plug (angled) - C13 black 2 m

The ACT Powercord CEE 7/7 male angled to C13 coupler is a 2 m black mains cable designed for 230 V installations. It provides a secure connection between equipment and a mains outlet, with an angled CEE 7/7 plug that reduces stress on the socket and a C13 coupler for common electronic devices. The cable is VDE/Kema approved and built with appropriate conductor cross-sections for safe operation at the specified length.

Advantages

The angled CEE 7/7 plug reduces bending stress at the wall outlet and helps save installation space. At 2 m length the cable uses a conductor size suitable for reliable current carrying and the C13 coupler ensures compatibility with many IT and AV devices. The black colour provides a neutral appearance that blends with most equipment.

Suitable for

• Powering desktop computers and monitors
• Servers and network equipment in racks
• AV equipment such as amplifiers and receivers
• Office peripherals like printers and UPS units

Key specifications

• Cable length: 2 m
• Input voltage: 230 V
• Current rating: 6 A
• Connector 1: CEE 7/7 angled (male)
• Connector 2: IEC C13 coupler
• Colour: Black
• Approvals: VDE / Kema

How to use

Connect the angled CEE 7/7 plug to a compatible 230 V mains outlet and insert the IEC C13 coupler into the device inlet. Ensure the connectors are fully seated and avoid sharp bends near the plug or coupler. Do not use the cable if the insulation or conductors are damaged; disconnect power before inspecting or replacing the cable.

Recommendations

For safe operation, use the cable within its 6 A current rating and 230 V supply. Avoid routing the cable where it can be pinched or exposed to mechanical damage. If extended lengths or higher currents are required, choose a cable with an appropriate conductor cross-section.