Bachmann 375.046 Power Cable Black 5 m

Power Cable Bachmann 375.046 Black 5 m is a 5‑metre, halogen‑free mains cable assembled with a right‑angled earthing contact plug on one end and a Wieland GST18i3 socket on the other. The cable conductor type is S05VV‑F 3G 1.5 mm², providing a combination of flexibility and adequate current carrying capacity for typical office and home electrical equipment.

Advantages

This Bachmann power cable uses a halogen‑free jacket and S05VV‑F 3G 1.5 mm² conductor to ensure good electrical conductivity and safer behaviour in the event of fire. The right‑angled earthing contact plug reduces strain at the outlet, while the Wieland GST18i3 socket enables a secure, standardized connection to compatible devices and distribution modules. The 5 m length offers extended reach without additional extensions.

Suitable for

• Connecting office equipment (computers, monitors, printers) to mains
• Powering AV and presentation equipment with Wieland GST18i3 inlet
• Home appliances and devices requiring a grounded connection
• Temporary or fixed installations where a 5 m cable length is required

Key specifications

• Brand: Bachmann
• Manufacturer part number (MPN): 375.046
• EAN: 4016514023639
• Cable type: S05VV‑F 3G 1.5 mm²
• Ends: Right‑angled earthing contact plug → Wieland GST18i3 socket
• Cable length: 5 m
• Colour: Black
• Halogen-free jacket

How to use

Insert the right‑angled earthing contact plug into a compatible mains outlet and connect the Wieland GST18i3 socket to the mating inlet on your device or distribution module. Ensure the connections are fully engaged and secured before powering the equipment. Route the cable to avoid sharp bends and pinching; do not place heavy objects on the cable. Verify that the device's power requirements are within the rating of the cable and connected plug.

Recommendations

Use this cable for devices compatible with a Wieland GST18i3 inlet and requiring a grounded supply. For permanent installations, check local electrical codes and, when necessary, have the installation inspected by qualified personnel. Replace the cable if the jacket or conductors show visible damage.