BKL Electronic 076105 DC hollow plug socket with 2m connection cable

Need a reliable way to connect a DC power source to your device without soldering or crimping? This DC power jack with pre-attached 2-meter wire leads solves that problem. The connector is a female DC power jack (socket) designed to mate with standard 5.5mm outer diameter, 2.1mm inner pin diameter DC plugs. The wire leads are terminated with ferrules (Aderendhülsen), making it easy to connect to terminal blocks or screw terminals. This inline connector is ideal for repairing or building custom DC power cables for electronics projects, LED lighting, CCTV cameras, and other low-voltage DC devices.

Who is it for

This connector is for electronics hobbyists, technicians, and installers who need a quick and secure DC power connection. It's especially useful when you need to extend a power cable or replace a damaged connector without specialized tools.

Main features

• DC power jack (female) with 5.5mm outer diameter and 2.1mm inner pin diameter
• 2-meter cable with ferrules on the wire ends for easy screw terminal connection
• Rated for up to 30V DC and 5A
• Inline (cable mount) design for flexible installation
• Durable plastic housing with nickel-plated brass contacts

Specifications

• Connector type: DC power jack (female)
• Mating plug outer diameter: 5.5 mm
• Mating plug inner pin diameter: 2.1 mm
• Mounting type: Inline / cable mount
• Number of poles: 2 (center pin and barrel)
• Rated voltage: 30 V DC
• Rated current: 5 A
• Termination style: Solder terminals (wire leads with ferrules)
• Housing material: Plastic
• Contact material: Brass, nickel plated
• Operating temperature: -20°C to +70°C
• Insulation resistance: >100 MΩ (at 500V DC)
• Dielectric strength: 500 V AC for 1 minute
• Durability: 5000 cycles

Tips

Ensure the mating plug has a 5.5mm outer diameter and 2.1mm inner pin diameter for a secure fit. The ferrules on the wire ends are designed for screw terminal connections; strip the insulation and insert the ferrule into the terminal, then tighten the screw. This connector is not suitable for mains voltage applications.