Black & Decker BCD900B-XJ Drill

The Black & Decker BCD900B-XJ is a pistol-grip rotary hammer designed for portable drilling and light chiselling tasks. Driven by an 18V battery and equipped with an SDS Plus chuck, this tool delivers up to 1880 RPM no-load speed and is intended for straightforward drilling in wood and metal as well as light masonry work. The compact design and two-colour housing (black and orange) make it suitable for trade professionals and DIY users who need a cordless solution for medium-duty jobs.

Advantages

The SDS Plus chuck enables quick, tool-free bit changes and secure retention during impact drilling. Battery power removes the need for a mains connection, improving mobility on site and in areas without immediate power access. With a maximum idle speed of 1880 RPM, the drill provides reliable rotational performance for a range of drilling tasks, while the pistol grip form factor offers comfortable control and straightforward handling.

Suitable for

• Drilling holes in wood up to 25 mm diameter
• Drilling holes in steel up to 13 mm diameter
• Light masonry drilling and anchor installation
• General DIY and maintenance tasks requiring a cordless rotary hammer

Key specifications

• Power source: 18V battery (cordless)
• Maximum no-load speed: 1880 RPM
• Chuck type: SDS Plus
• Maximum drilling capacity: wood up to 25 mm, steel up to 13 mm
• Form factor: pistol grip
• Housing colours: black and orange

How to use

Install a compatible SDS Plus bit by inserting it into the chuck until it locks. Ensure the battery is charged and correctly inserted before operation. Select the appropriate drill bit and position the tool perpendicular to the work surface. Apply steady pressure and operate at a speed and impact setting suitable for the material. After drilling, remove the bit by pulling back the chuck sleeve and withdrawing the bit; store the battery separately for charging when needed. Follow standard safety precautions including eye protection and secure workpiece clamping.

Recommendations

Use the BCD900B-XJ with the correct SDS Plus bits for masonry and dedicated wood or metal bits for the corresponding materials. For prolonged drilling sessions, use a fully charged battery and allow the tool to cool periodically to maintain performance. Wear appropriate personal protective equipment and keep the ventilation slots clear of debris.