Brother BT0122004 Craft Cutting Machine Accessory/Part

This Brother Craft Cutting Machine part (model CADXBLDQ1 / BT0122004) is a durable steel blade designed for cutting fabrics used in quilting and raw-edge appliqué that do not have a fusible backing. Blade thickness varies between approximately 0.25 mm and 0.5 mm depending on the material, and it is intended for use with compatible ScanNCut DX and CADXBLDQ1 models.

Advantages

The steel blade provides precise, clean cuts on most suggested fabrics when used correctly. It is designed with Japanese-quality standards for durability and consistent performance. The single-piece accessory is compatible with selected Brother ScanNCut DX models, supporting accurate cutting for quilting blocks and raw-edge appliqué pieces.

Suitable for

Key specifications

How to use

Install the blade into the compatible Brother ScanNCut DX blade holder according to the machine manual. Select appropriate fabric settings for non-fusible quilting materials and perform a test cut on a scrap piece to confirm blade depth and cutting pressure. Feed the fabric as instructed by your machine’s guidelines and proceed to cut quilting blocks or appliqué shapes using the recommended settings.

Recommendations

Use on fabrics without fusible backing only; adjust blade depth and pressure for different fabric thicknesses and perform test cuts to ensure precise results. Replace the blade when cutting quality decreases.