Cable management system Digitus DN-CT-10M-25

The DIGITUS Cable Management System DN-CT-10M-25 includes a 5.0 m self-adhesive mushroom tape and a 10.0 m hook-and-loop tape, both 25 mm wide and made from durable polyamide. The mushroom tape sticks to non-powder-coated surfaces and the hook-and-loop tape is used to bundle cable strands. The system supports bundling of typical fiber optic and copper data cables and is suitable for organizing cables inside network cabinets and other installations. Made in Germany, the components withstand temperatures up to 160 °C.

Advantages

Quick to install without additional components and supplied on rolls to be cut to size. The system can be attached directly to non-powder-coated surfaces after degreasing and provides a fabric surface that reduces mechanical stress on bundled data lines compared with metal cable managers. The mushroom tape features an ultra-adhesive fastening with high contact strength, and the solution is more cost-effective than cable management using clamps and C-profile rails.

Suitable for

• Organizing fiber optic and copper data cables in network cabinets
• Bundling 2 to 48 data lines
• Server rooms, telecom cabinets, and structured cabling installations
• Environments where reduced mechanical stress on cables is required

Key specifications

• Contents: 5.0 m self-adhesive mushroom tape + 10.0 m hook-and-loop tape
• Material: Polyamide
• Width: 25 mm
• Temperature resistance: up to 160 °C
• Brand: DIGITUS, MPN: DN-CT-10M-25, EAN: 4016032449041

How to use

Degrease the non-powder-coated surface before application. Cut the mushroom tape and hook-and-loop tape to the required length. Adhere the mushroom tape to the prepared surface, pressing firmly to ensure contact; the mushroom tape provides high adhesion at the contact points. Use the hook-and-loop tape to wrap and secure cable bundles, adjusting bundle sizes as needed.

Recommendations

For best adhesion, apply the mushroom tape to clean, dry and degreased non-powder-coated surfaces. Avoid use on powder-coated or highly textured surfaces. Regularly check cable bundles after installation and adjust tension to avoid excessive compression of cables.