Computer Case Darkflash FT418 PRO, ATX, Black

The Darkflash FT418 PRO is a compact ATX mid-tower computer case in black, equipped with seven ARGB fans and three tempered glass panels to provide both cooling capacity and an unobstructed view of internal components. Constructed from 0.5 mm SPCC steel, it supports ATX, M-ATX and ITX motherboards and allows installation of long GPUs, a standard PSU and a mainstream air cooler while offering multiple storage and cooling options.

Advantages

The FT418 PRO combines durable metal construction with a panoramic tempered-glass design and seven included ARGB fans, delivering effective airflow and visual customization out of the box. Its internal layout supports long graphics cards up to 400 mm, power supplies up to 200 mm and CPU coolers up to 157 mm, while the case can accommodate up to ten fans or dual 360 mm radiators for advanced liquid cooling setups.

Suitable for

• Gaming PC builds with emphasis on airflow and RGB lighting
• High-performance workstations requiring long GPUs and multiple storage drives
• Compact ATX, micro-ATX and Mini-ITX builds with tempered-glass showcase

Key specifications

• Manufacturer: Darkflash
• Model: FT418 PRO (Black)
• Form factor: Mid Tower (supports ATX / M-ATX / ITX)
• Material: 0.5 mm SPCC steel
• Side panels: 3× tempered glass
• Included fans: 7× ARGB fans (installed)
• Maximum GPU length: 400 mm
• Maximum PSU length: 200 mm
• Maximum CPU cooler height: 157 mm
• Maximum number of fans supported: 10
• Fan mounting: Top 3×120 mm, Side 3×120 mm, Bottom 3×120 mm, Rear 1×120 mm
• Water cooling support: Top 360 mm, Side 360 mm (two 360 mm radiators supported)
• Drive bays: 2× 3.5" HDD, 3× 2.5" SSD
• Expansion slots: 4
• Front/top I/O: 1× USB 3.0, 1× USB 2.0, 1× audio jack
• Dimensions (H×W×D): 435 × 280 × 418 mm
• Weight: 5.4 kg

How to use

Install a compatible ATX, M-ATX or ITX motherboard and mount the power supply and storage drives in the dedicated bays. Fit the graphics card (up to 400 mm) and CPU cooler (up to 157 mm) according to component clearances, connect the included ARGB fans to the motherboard or hub, and route cables through the available cutouts to ensure unobstructed airflow. If installing liquid cooling, mount radiators at the top or side as supported and secure tubing to avoid interference with other components.

Recommendations

For balanced cooling and noise control, use a mixed fan configuration (intake at the front/side and bottom, exhaust at the rear and top) and enable motherboard ARGB control to synchronize lighting. Verify PSU and GPU lengths before purchase and use cable management to maximize airflow through the three tempered-glass panels.