DANFOSS DPH-10 230V 25m self-regulating pipe heating cable with Schuko plug 98300081

The DPH-10 from DANFOSS is a ready-to-install heating cable specifically configured for frost protection of pipes, valves, and gutters. Unlike bare heating wire, this model comes pre-terminated with a Schuko plug and a 2.5 m cold lead, so it can be connected directly to a standard 230 V socket without additional wiring. The constant wattage output of 10 W/m delivers a total of 250 W across the full 25 m length, providing reliable heat where it is needed most.

Highlights

• Pre-assembled with Schuko plug and 2.5 m cold lead for immediate use
• Constant wattage output: 10 W/m, total 250 W at 230 V
• UV-resistant PVC outer jacket for long-term outdoor durability
• Flexible design for external pipe mounting and wrapping
• Operates in temperatures from -20 °C to +65 °C

In daily use

The DPH-10 is intended for straightforward frost protection tasks. It is mounted externally on pipes or in gutters, where it prevents freezing without the need for a thermostat. The cable remains flexible even in cold conditions, making installation around bends and fittings easier. With an outer diameter of approximately 6.9 mm, it is unobtrusive and can be secured with standard fixing tape or clips.

Full specifications

• Heating cable type: Constant wattage
• Operating voltage: 230 V AC
• Power output: 10 W/m (250 W total)
• Heated length: 25 m
• Cold lead length: 2.5 m
• Plug type: Schuko (Type F)
• Max. permissible operating temperature: +65 °C
• Min. installation temperature: -20 °C
• Outer jacket: PVC, UV resistant
• Conductor material: Copper
• Insulation material: XLPE
• Cable diameter: 6.9 mm
• Mounting method: External pipe mounting, wrapping

Final note

The DPH-10 is a practical solution for preventing frost damage in residential and commercial plumbing systems. Its plug-and-play design saves installation time and reduces the need for specialized electrical work.