Datalogic CAB-461 RS-232 Signal Cable 3.6m

The Datalogic RS-232 RJ10 signal cable CAB-461 is a coiled 3.6 m (12 ft) cable designed for stable serial communication between Datalogic devices and compatible peripherals. It uses an RJ10 connector and RS-232 signalling to provide reliable data transmission in commercial and industrial environments.

Advantages

This RS-232 cable offers a coiled design that reduces clutter while allowing extension to its full 3.6 m length when needed. The RJ10 connector provides straightforward plug-and-play connection with supported Datalogic Bi-Optic AUX ports, and the cable's RS-232 compatibility ensures stable serial communication for peripherals and host devices.

Suitable for

• Connecting Datalogic Magellan or other compatible barcode scanners to RS-232 ports
• Linking peripherals such as POS systems, terminals, or controllers that accept RJ10 RS-232 connections
• Use in retail, warehousing, or light industrial environments where reliable serial communication is required

Key specifications

• Brand: Datalogic
• Manufacturer part number (MPN): CAB-461
• EAN: 4054318743452
• Cable type: RS-232 signal cable
• Connector: RJ10 (for Magellan Bi-Optic AUX port)
• Length (extended): 3.6 m / 12 ft
• Design: Coiled

How to use

Connect the RJ10 end of the CAB-461 cable to the Magellan Bi-Optic AUX port or compatible RJ10 RS-232 jack on the Datalogic device, and connect the other end to the peripheral or host device requiring RS-232 communication. Ensure devices are powered and configured to the correct serial settings (baud rate, parity, data bits, stop bits) as required by your equipment.

Recommendations

Route the coiled cable to avoid sharp bends or pinch points and keep it away from high-voltage lines or sources of electromagnetic interference to preserve signal integrity. Verify serial settings on both devices after connecting to confirm successful communication.