DeLOCK 66300 Microphone

The DeLOCK 66300 is a professional USB condenser microphone designed for high-quality voice and vocal recordings. It features a 16 mm condenser capsule with a cardioid polar pattern to capture sound from the front while reducing ambient noise. The microphone supports a 24-bit / 192 kHz sampling rate, offering studio-grade resolution, and connects via a wired USB interface with a 2.5 m cable for reliable use on Windows, macOS, Chrome OS and Linux.

Advantages

The microphone delivers low self-noise and precise transient response, allowing even fine sounds to be recorded clearly. An included dual-layer pop filter and a foam windscreen reduce plosives and wind noise for cleaner vocal tracks. The stable adjustable stand with telescopic function keeps the microphone steady on a desk and allows height adjustment. Plug & Play USB connectivity requires no driver installation for immediate operation.

Suitable for

• Streaming and podcasting
• Voiceover and vocal recording
• Online meetings and communication
• Home studio and content creation

Key specifications

• Sensitivity: -38 dB
• Frequency response: 30 – 16,000 Hz
• Bit depth / sampling rate: 24 bit / 192 kHz
• Signal-to-noise ratio: 70 dB
• Connectivity: Wired USB (device interface: USB)
• Cable length: 2.5 m
• Polar pattern: Cardioid (unidirectional)
• Colour: Black

How to use

Connect the microphone to a USB port using the supplied cable; the device is recognized automatically by supported operating systems and requires no driver installation. Position the microphone on its stand at a suitable height and angle with the cardioid capsule facing the sound source. Use the dual-layer pop filter at a short distance in front of the capsule and the windscreen if needed to reduce plosive and wind noises. Adjust the input level in your recording software or system settings to avoid clipping while maintaining a good signal-to-noise ratio.

Recommendations

For best results, place the microphone 10–20 cm from the mouth and slightly off-axis to reduce plosives. Record in a room with minimal reflective surfaces or use acoustic treatment to improve clarity. Monitor levels during a test recording and lower gain if distortion occurs.