DeLOCK 85491 USB Cable USB 2.0 5m USB B Black

The DeLOCK 85491 PoweredUSB cable combines a USB 2.0 Type-B connector with a Hosiden Mini-DIN 3-pin power plug to connect devices to a PoweredUSB 24 V port on a PC or hub. With a length of 5 m and a black jacket, the cable supports both data transfer (up to 0.48 Gbit/s) and power delivery for compatible POS equipment such as receipt printers and payment terminals from manufacturers like Epson or Toshiba.

Advantages

This USB cable provides simultaneous data and power over a single connection, reducing cable clutter and simplifying installation. Its 5 m length allows flexible placement of peripheral devices, while the USB 2.0 Type-B interface ensures wide compatibility with legacy POS hardware. The male-to-male design and standardized connectors make it suitable for direct connection to PCs or PoweredUSB hubs.

Suitable for

• POS receipt printers
• Payment terminals and card readers
• Embedded POS peripherals requiring 24 V PoweredUSB
• Connection to PoweredUSB-enabled PCs or hubs

Key specifications

• Brand: DELOCK
• Model / MPN: 85491
• EAN: 4043619854912
• Connector: USB Type B (data) + Hosiden Mini-DIN 3-pin (power)
• USB version: USB 2.0 (up to 0.48 Gbit/s)
• Cable length: 5 m
• Colour: Black

How to use

Insert the USB Type-B connector into the device's USB B port and plug the Hosiden Mini-DIN 3-pin power plug into the device's power inlet. Connect the other end to a PoweredUSB 24 V port on a PC or compatible hub. After connection, the device should receive both data and power from the host; verify device drivers and hub settings on the PC if necessary.

Recommendations

Use this cable only with devices and hubs designed for PoweredUSB 24 V. Ensure connectors are aligned before insertion and avoid bending the cable sharply near the ends to maintain signal integrity and power delivery.