Desk-Mounted CPU Holder LogiLink EO0031

The LogiLink EO0031 desk-mounted CPU holder is a compact bracket engineered to secure tower and small-form computer chassis to the underside or side of a desk. It accepts chassis widths from 8.8 cm to 20.3 cm and supports case heights starting at 30 cm, providing a space-saving solution that keeps the case off the floor while maintaining accessibility. The holder is rated to carry up to 10 kg and comes in black finish. Its external dimensions are 175 mm (width) × 592 mm (depth) × 106 mm (height), which helps plan installation and clearance in typical workstation setups.

Advantages

The desk-mounted design reduces desk clutter and protects the PC from dust and floor-level damage while keeping ports and drives easily reachable. Adjustable width compatibility allows the holder to accommodate a broad range of chassis sizes without the need for multiple brackets. With a defined maximum weight capacity of 10 kg and clear dimensional specifications, the EO0031 offers predictable load handling and installation planning for office and home environments.

Suitable for

• Mounting small-form and mid-tower PC cases under or beside desks
• Home offices and corporate workstations where floor space should remain clear
• Environments requiring easier access to rear ports and front drives
• Settings where modest PC weight and compact dimensions are standard

Key specifications

• Type: Desk-mounted CPU holder
• Compatible chassis width: 8.8 cm – 20.3 cm
• Minimum compatible chassis height: 30 cm
• Maximum weight capacity: 10 kg
• Product colour: Black
• Holder dimensions (W × D × H): 175 mm × 592 mm × 106 mm

How to use

Position the LogiLink EO0031 at the chosen underside or side edge of the desk, verify available clearance against the holder dimensions, and adjust the bracket to match the width of the computer chassis between 8.8 cm and 20.3 cm. Secure the holder to the desk following the supplied mounting instructions and fasten the PC in the holder so that its base and sides are supported. After installation, check that the case weight does not exceed 10 kg and that ventilation and cable routing are not obstructed.

Recommendations

Use the holder on desks with sufficient structural strength to carry the PC plus dynamic loads. Regularly inspect mounting points and fasteners for tightness and ensure the installed chassis weight remains within the 10 kg limit; avoid using the holder with oversized or heavy server-grade enclosures.