Account Contact
Filter
Your Cart
DPD & FedEx – delivery date on the product page
Need help? Ask our AI

Drill Chucks (15)

✨AI advisor
ℹ️ About this category ↓
Brand: GEKO Stock: 558
The GEKO G00503 is a keyed drill chuck with a clamping range of 1.5-13 mm and a B16 taper, designed for use with small and large hand drills.The jaws ..
4.96 €
Ex Tax:4.20 €
1 supplier
Buy
Brand: GEKO Stock: 545
The GEKO G00532 is a keyed drill chuck with a clamping range of 1.5-10 mm and a B12 taper, designed for use with small hand drills.The jaws are tighte..
4.32 €
Ex Tax:3.66 €
1 supplier
Buy
Brand: GEKO Stock: 1568
The GEKO G00510 is a keyless drill chuck with a clamping range of 2-13 mm and a 1/2" thread, designed for use with small and large hand drills.The key..
5.34 €
Ex Tax:4.53 €
2 suppliers
Buy
Brand: GEKO Stock: 1788
The GEKO G00521 is a keyless drill chuck with a clamping range of 2-13 mm and a 1/2"-20 UNF, designed for use with small and large hand drills.The jaw..
10.00 €
Ex Tax:8.47 €
2 suppliers
Buy
Brand: GEKO Stock: 449
The GEKO G00541 is a keyed drill chuck with a clamping range of 3-16 mm and a B16 taper, designed for use with small hand drills.The jaws are tightene..
8.52 €
Ex Tax:7.22 €
1 supplier
Buy
Brand: GEKO Stock: 457
The GEKO G00550 is a keyed drill chuck with a clamping range of 5-20 mm and a B22 taper, designed for use with hand drills.The jaws are tightened with..
25.01 €
Ex Tax:21.19 €
1 supplier Reward +0,05 €
Buy
Brand: GEKO Stock: 447
The GEKO G00530 is a keyed drill chuck with a clamping range of 1.5-10 mm and a 3/8" thread, designed for use with small hand drills.The jaws are tigh..
4.43 €
Ex Tax:3.76 €
1 supplier
Buy
Brand: GEKO Stock: 813
The GEKO G00531 is a keyed drill chuck with a clamping range of 1.5-10 mm and a 1/2" thread, designed for use with small hand drills.The jaws are tigh..
4.53 €
Ex Tax:3.84 €
1 supplier
Buy
Brand: GEKO Stock: 980
The GEKO G00501 is a keyed drill chuck with a clamping range of 1.5-13 mm and a M12x1.25 thread, designed for use with small and large hand drills.The..
5.20 €
Ex Tax:4.41 €
1 supplier
Buy
Brand: GEKO Stock: 304
The GEKO G00504 is a keyed drill chuck with a clamping range of 1.5-13 mm and a 3/8" thread, designed for use with small and large hand drills.The jaw..
4.99 €
Ex Tax:4.23 €
1 supplier
Buy
Brand: GEKO Stock: 588
The GEKO G00547 is a keyed drill chuck with a clamping range of 3-16 mm and a 5/8" thread, designed for use with small hand drills.The jaws are tighte..
8.43 €
Ex Tax:7.14 €
1 supplier
Buy
Brand: GEKO Stock: 423
The GEKO G00551 is a keyless drill chuck with a clamping range of 5-20 mm and a B22 taper, designed for use with small and large hand drills.The jaws ..
29.33 €
Ex Tax:24.86 €
1 supplier Reward +0,06 €
Buy
Brand: GEKO Stock: 2263
The GEKO G00500 is a keyed drill chuck with a clamping range of 1.5-13 mm and a 1/2" thread, designed for use with small and large hand drills.The jaw..
4.67 €
Ex Tax:3.95 €
2 suppliers
Buy
Brand: GEKO Stock: 672
The GEKO G00548 is a keyless drill chuck with a clamping range of 1-16 mm and a B18 taper, designed for use with small and large hand drills.The jaws ..
22.21 €
Ex Tax:18.82 €
1 supplier Reward +0,05 €
Buy
Brand: GEKO Stock: 479
The GEKO G00534 is a keyless drill chuck with a clamping range of 1.5-10 mm and a 3/8" thread, designed for use with small hand drills.The keyless sel..
4.49 €
Ex Tax:3.80 €
1 supplier
Buy
Showing 1 to 15 of 15 (1 Pages)
Tools, Construction & Workshop
Key and keyless drill chucks with thread or taper mount

Replacement chucks for drills and drill stands: key-type chucks with 10, 13 and 16 mm capacity, keyless chucks such as 2-13 and PROFI chucks up to 1-16 mm and 5-20 with a B22 taper.

15 productsDrill chucksVia official distributors

How to choose

Capacity
The first figure in the name is the largest bit shank the chuck can hold: 10, 13 or 16 mm. Range versions show both ends, such as 2-13, 1-16 mm or 5-20.
Threaded mount
Chucks marked 3/8, 1/2 or 5/8 screw onto a threaded drill spindle. Check the thread on your drill first, because a 3/8 chuck will not fit a 1/2 spindle.
Taper mount
Chucks marked B12, B16, B18 or B22 sit on a taper arbor, as used on drill stands and pillar drills. The B number of the chuck must match the arbor.
Key or keyless
Key-type chucks are tightened with a chuck key and hold the bit firmly. Keyless chucks are tightened by hand, which makes bit changes quicker. There is also a 2-13 1/2 chuck with a metal body.

What you will find here

Drill chucksKey drill chucksKeyless drill chucks1/2 drill chuck3/8 drill chuckB16 taper chuckB18 taper chuckDrill stand chucks
Check before buying: Check two things in the product name: the capacity in mm and the mount, either a thread (3/8, 1/2, 5/8) or a taper (B12, B16, B18, B22). Both must match your drill or stand.

Frequently asked questions

What does 13-1/2 mean in the name?
13 is the largest capacity in mm and 1/2 is the thread that screws onto the drill spindle.
Key or keyless: which should I choose?
A key chuck grips harder and suits heavy drilling. A keyless chuck is faster to use when you change bits often.
Which chuck fits a drill stand?
Drill stands usually use a taper arbor. Choose a chuck with the same B number as the arbor, for example B16, B18 or B22.
Seller: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lithuania · Company code 303192950 · VAT number LT100008198612 · Ships from the EU (Lithuania)
Product Filter
WhatsApp
Messenger
Hi, I’m DistriNode’s AI assistant. I can help you find products, compare options, create quote PDFs, or open support requests.
All categories