EFB Elektronik ET-25211.2V1 2 x RJ-45 Socket Module

The EFB Elektronik ET-25211.2V1 is a wall-mounted socket outlet with two RJ-45 ports in a white finish, designed to provide wired network connectivity in homes, offices and commercial interiors. The compact module integrates two keystone RJ-45 connectors in a single faceplate, offering a straightforward solution for connecting computers, switches, IP phones and other Ethernet devices where a stable wired connection is needed.

Advantages

The dual RJ-45 configuration allows simultaneous connection of two devices from one outlet location, reducing the need for external adapters or additional cabling. The white, low-profile faceplate blends with standard interior décors and mounting frames. The module is designed for simple installation into standard wall boxes and for reliable, consistent Ethernet signal transmission when used with appropriate cabling and network equipment.

Suitable for

• Home network installations (PCs, media players, smart TVs)
• Office workstations and meeting rooms
• IP telephony and VoIP endpoints
• Small server or network closet patch points

Key specifications

• Connector type: 2 × RJ-45 ports
• Colour: White
• Mounting: wall-mounted faceplate module for standard electrical boxes
• Application: wired Ethernet connectivity

How to use

Mount the ET-25211.2V1 into a compatible wall box or mounting frame following local electrical and low-voltage installation rules. Terminate the incoming network cables to the rear of the RJ-45 keystone modules using appropriate wiring standards (such as T568A or T568B) and verify correct pair mapping. Secure the faceplate to the wall box and connect network devices using standard RJ-45 patch cables. After installation, test each port with a network tester or by connecting a device to ensure link and data transmission.

Recommendations

Use shielded or unshielded twisted-pair cabling of suitable category for your network speed (Cat5e, Cat6 or higher as required). Ensure connectors are terminated properly and avoid sharp cable bends near the termination point. Follow local regulations for low-voltage installations and, if unsure, consult a qualified installer to guarantee reliable network performance.