Equip Cat.6 RJ-45 U/UTP Patch Cable 20m Red

The Equip Cat.6 U/UTP Patch Cable is a 20 m red network cable designed for high-speed data transmission up to 10000 Mbit/s. It uses Cat.6 construction and U/UTP topology to provide improved bandwidth and signal-to-noise margin compared with lower-category cables. The cable is fitted with RJ-45 connectors with gold plating to ensure reliable connectivity and reduced contact corrosion.

Advantages

This Patch Cable Equip Cat.6 RJ-45 U/UTP 20m Red combines Cat.6 performance with U/UTP shielding to minimise electromagnetic interference and crosstalk. The gold-plated RJ-45 connectors improve contact reliability and durability, while the 20 m length offers flexibility for office or server-room installations. The red jacket makes cable identification easier in structured cabling.

Suitable for

• 10GBase-T Ethernet connections
• Patching between switches, routers and patch panels
• Office networks and data centers
• Environments requiring identifiable colored cabling

Key specifications

• Cable length: 20 m
• Connectors: RJ-45 – RJ-45
• Cabling technology: 10GBase-T (Cat.6, U/UTP)
• Maximum data rate: up to 10000 Mbit/s
• Product colour: Red
• Weight: 0.435 kg
• MPN: 625429
• EAN: 4015867172179

How to use

Connect one RJ-45 connector to your network device (switch, router, NIC) and the other RJ-45 connector to the corresponding port on the target device or patch panel. Ensure connectors are fully inserted and the cable is not excessively bent or pinched to maintain signal integrity. For runs approaching 20 m, verify link speed and error rates after installation.

Recommendations

Route the cable away from strong sources of electromagnetic interference (large electric motors, fluorescent lighting ballast, or unshielded power cabling). Use appropriate cable management (ties, trays, or ducts) to avoid sharp bends and mechanical stress; test the link after installation to confirm expected performance.