Equip Cat.6A S/FTP Network Cable Patch Cable RJ-45 20 m Grey

The Equip Cat.6A S/FTP Patch Cable is a 20 m grey network cable designed for high-performance wired connections. Supporting data rates up to 10000 Mbit/s and 10GBase-T cabling technology, this cable uses RJ-45 connectors with gold plating and S/FTP shielding to ensure reliable signal transmission and reduced electromagnetic interference in demanding network environments.

Advantages

The Cat.6A S/FTP construction provides improved bandwidth and a better signal-to-noise ratio compared with lower-category cables, enabling ultrahigh and low-error performance for 10G applications. Gold-plated RJ-45 contacts offer stable connectivity and corrosion resistance, while the 20 m length suits medium to large installations without additional joins.

Suitable for

• 10GBase-T network connections
• Server rooms and data centers
• Office and structured cabling systems
• High-bandwidth workstations and media streaming

Key specifications

• Cable length: 20 m
• Connectors: RJ-45 — RJ-45
• Cabling technology: 10GBase-T
• Rated speed: up to 10000 Mbit/s
• Shielding: S/FTP
• Product colour: Grey
• Weight: 0.626 kg
• Brand: EQUIP, MPN: 606710, EAN: 4015867229675

How to use

Connect one RJ-45 plug to your network device (switch, router or network card) and the other end to the corresponding port of the target device. Ensure both connected devices support the intended 10GBase-T speed for maximum performance. Route the cable to avoid sharp bends and sources of strong electromagnetic interference; secure with cable management accessories as needed.

Recommendations

For optimal results, test link speed after installation and keep cable runs within recommended distances for 10GBase-T. Avoid running the cable parallel and close to high-voltage power lines to minimize interference.