Ernitec 0070-11816 Surveillance Camera Accessory

The Ernitec 0070-11816 is a security camera accessory made from aluminum alloy and plastic, finished in white. Designed to support and position surveillance cameras, this accessory offers a compact footprint (φ122.9 × 42 mm) and a lightweight construction (0.24 kg) suitable for indoor and sheltered outdoor installations. It is compatible with a range of camera models and supports a maximum load of 3 kg (6.61 lb), operating reliably in humidity levels from 0% to 90% RH.

Advantages

This accessory combines aluminum alloy strength with plastic components to provide a balance of durability and low weight. Its compact dimensions and 0.24 kg weight simplify mounting and handling. The white finish integrates unobtrusively with many camera housings and installation environments. With a 3 kg load capacity, it accommodates most small to medium surveillance cameras while tolerating a wide range of ambient humidity.

Suitable for

• Mounting small to medium dome and bullet security cameras
• Indoor surveillance installations in offices, retail and residential spaces
• Sheltered outdoor locations where humidity ranges up to 90% RH

Key specifications

• Material: Aluminum alloy + Plastic
• Color: White
• Operating humidity: 0% - 90% RH
• Maximum load bearing: 3 kg (6.61 lb)
• Dimensions: φ122.9 × 42 mm (φ4.84 × 1.65")
• Weight: 0.24 kg (0.53 lb)
• Brand: ERNITEC
• MPN: 0070-11816
• EAN: 5715063352380

How to use

Select an appropriate mounting location that can support the accessory and the camera weight. Attach the accessory to the chosen surface following the camera and mounting hardware manufacturer instructions, ensuring secure fastenings. Mount the camera to the accessory and verify alignment and field of view. Check that the combined weight of camera and accessories does not exceed the 3 kg load limit. After installation, confirm that cabling is routed and secured to prevent strain on connections.

Recommendations

Use the accessory in environments within the specified humidity range (0%–90% RH) and avoid exposing it to direct water jets or prolonged immersion. For outdoor installations, choose sheltered positions or additional weather protection. Periodically inspect mounting fastenings and the accessory for corrosion or damage, and replace if structural integrity is compromised.