Fibre Optic Patch Cable helos E2000 1 m, 9/125 µm OS2, Yellow

helos E2000 fiber optic patch cable, single-mode OS2, 1 m length with 9/125 µm core/cladding and yellow jacket. The cable features an E2000 connector on one end and LC connectors on the other, designed for short interconnects in telecom, data centers and network equipment where low attenuation and reliable single‑mode performance are required.

Advantages

This 1 m helos patch cable combines OS2 single‑mode fiber with precision connectors (E2000 to LC) to provide consistent low-loss transmission and stable mating. The yellow jacket identifies the single‑mode type for easy routing and management. The cable’s 9/125 µm geometry matches standard single‑mode ports and supports long‑reach single‑mode links within fiber distribution systems.

Suitable for

• Telecommunication equipment interconnects
• Data center patch panels and cross-connects
• Network equipment and fiber optic transceivers
• Laboratory and test setups requiring short single‑mode links

Key specifications

• Type: Patch cable, single‑mode OS2
• Length: 1 m
• Fiber: Single‑mode, 9/125 µm
• Connectors: 1x E2000 to 2x LC (E2000 on one end, LC on the other)
• Color: Yellow
• Brand / MPN / EAN: helos / 254586 / 4005938545865

How to use

Inspect connectors and ports for dust and clean with appropriate fiber cleaning tools before mating. Insert the E2000 connector into the corresponding E2000 port and the LC connectors into LC ports or cassette adapters until they click into place. Route the 1 m cable to avoid tight bends; maintain bend radius recommended for 9/125 µm fiber to prevent increased attenuation. Confirm link continuity and attenuation with an optical power meter or tester if required.

Recommendations

Store unused ends with protective caps, avoid exceeding the specified bend radius, and perform regular connector cleaning to ensure stable single‑mode performance and low insertion loss.