Fluke 1672 SCH Installation Tester with Memory 5580829

Electrical installations demand precise verification of insulation, continuity, loop impedance, and RCD protection. The Fluke 1672 SCH Installation Tester with Memory delivers comprehensive testing in a single, rugged instrument, ensuring compliance and safety in residential, commercial, and industrial settings.

Who is it for

Electricians, electrical contractors, and maintenance technicians who need to perform installation testing according to local regulations, including initial verification and periodic inspection. Ideal for those who require reliable data storage and reporting capabilities.

Main features

• Insulation testing at 50 V, 100 V, 250 V, 500 V, and 1000 V with measurement range from 0.01 MΩ to 1000 MΩ.
• Continuity testing with test current greater than 200 mA and range from 0.01 Ω to 2000 Ω.
• Loop impedance measurement using both high-current and non-trip methods.
• RCD testing for types AC, A, B, S, and F, including trip time and ramp tests.
• Voltage measurement from 2 V to 500 V AC/DC and frequency measurement from 45 Hz to 65 Hz.
• Phase sequence testing for three-phase systems.
• Internal memory for up to 1500 measurements with Fluke Connect Bluetooth and USB connectivity.
• Backlit LCD display for clear readings in any lighting.
• Auto test sequence for efficient, repeatable testing.
• Zero adapter included for test lead compensation.

Specifications

• Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
• Insulation resistance range: 0.01 MΩ to 1000 MΩ
• Continuity test current: >200 mA
• Continuity resistance range: 0.01 Ω to 2000 Ω
• Loop impedance: high current and non-trip
• RCD types: AC, A, B, S, F
• RCD tests: trip time and ramp test
• Voltage range: 2 V to 500 V AC/DC
• Frequency range: 45 Hz to 65 Hz
• Safety rating: CAT III 500 V, CAT IV 300 V
• Data storage: internal memory for 1500 measurements
• Connectivity: Fluke Connect (Bluetooth), USB
• Display: backlit LCD
• Power source: 6 x AA batteries
• IP rating: IP40
• Operating temperature: -10 °C to 50 °C
• Auto test sequence: yes
• Test lead compensation: zero adapter included

Tips

Use the auto test sequence to speed up repetitive testing tasks. Regularly zero the test leads to maintain measurement accuracy. Store measurements in the internal memory and transfer them via Fluke Connect for easy reporting.