Garbot B-02-52800 Network Cable 10m Cat6 U/UTP Grey

The Garbot B-02-52800 is a 10 m Cat6 U/UTP patch cable with RJ-45 connectors on both ends, designed for networking connections between devices. The cable uses four twisted pairs in stranded construction and follows the EIA/TIA 568 contact assignment (1:1). Gold-plated contacts and moulded kink protection on the connectors provide reliable conductivity and improved durability. The grey jacket and flexible design make it suitable for compact and constrained cable runs.

Advantages

The cable supports Cat6 performance and U/UTP construction to reduce external interference. Gold-plated RJ-45 plugs ensure stable signal transmission and corrosion resistance. Molded strain relief improves connector longevity while the flexible jacket allows for narrow bending radii without damage.

Suitable for

• Home and office Ethernet connections (up to Cat6 performance)
• Patch panels and wall ports
• Connecting switches, routers, computers, and network devices
• Short to medium cable runs where flexibility is required

Key specifications

• Length: 10 m
• Category: Cat6
• Shielding: U/UTP (unshielded overall with twisted pairs)
• Connectors: RJ-45 to RJ-45, gold-plated contacts
• Contact assignment: EIA/TIA 568 (1:1)
• Construction: 4-pair stranded copper
• Colour: Grey

How to use

Insert each RJ-45 connector firmly into the device port until it clicks. Ensure both ends are fully seated in the ports on switches, routers, computers, or wall jacks. Route the cable avoiding sharp edges and excessive tensile stress; use cable management clips or ties to secure runs and maintain bending radii. Test the connection with network diagnostic tools after installation to confirm link speed and integrity.

Recommendations

For best performance, keep the cable run length within typical Ethernet limits for Cat6 and avoid running parallel to high-voltage power lines. Use the cable in indoor environments and avoid prolonged exposure to direct sunlight or moisture.