35.05 €
Ex Tax:29.70 €
35.05 €
Ex Tax:29.70 €
Brand: NO NAME
Stock: 11
35.05 €
Ex Tax:29.70 €
Brand: NO NAME
Stock: 30
35.05 €
Ex Tax:29.70 €
Brand: NO NAME
Stock: 4
35.13 €
Ex Tax:29.77 €
Showing 1 to 3 of 3 (1 Pages)
Tools, Construction & Workshop
Gas regulators for welding, cutting and gas appliances
Gas pressure regulators and reducers: oxygen, acetylene and CO2/argon regulators for welding and cutting, some with two gauges or a flowmeter, and regulators for propane-butane cylinders used with gas appliances such as barbecues and camping stoves.
Oxygen, acetylene, CO2/argon, propane-butaneVia official distributors
How to choose
Welding and cutting
Single-stage regulators for oxygen, acetylene and CO2/argon reduce the cylinder pressure to the working pressure. Models with two gauges show both the cylinder pressure and the outlet pressure.
Regulators with a flowmeter
A CO2/argon regulator with a flowmeter shows the gas flow in litres per minute, which is used for MIG/MAG and TIG welding.
Propane-butane regulators
Regulators for propane-butane cylinders supply a fixed outlet pressure to gas appliances such as barbecues, camping stoves and heaters.
Gas type and thread
A regulator is made for one gas type and one cylinder connection. Check the gas, the inlet thread and the outlet in the product name.
What you will find here
Check before buying: A gas regulator must match the gas type, the cylinder connection and the pressure range. Check them in the product name before buying. Welding hoses are in their own category.
Frequently asked questions
What does a gas regulator do?
A gas regulator, also called a pressure reducer, lowers the high pressure in a gas cylinder to a steady working pressure for a welding torch or a gas appliance.
Can one regulator be used for different gases?
No. A regulator is made for a specific gas, such as oxygen, acetylene, CO2/argon or propane-butane, and for a specific cylinder connection. Use the gas shown in the product name.
What is the flowmeter on a CO2/argon regulator for?
The flowmeter shows the flow of the shielding gas in litres per minute, so you can set it for MIG/MAG welding.