Gembird 3DP-PETG1.75-01-G 3D Printing Material

Gembird 3DP-PETG1.75-01-G is a 1 kg spool of green PETG filament designed for fused filament fabrication (FFF) 3D printing. Made from Polyethylene Terephthalate Glycol (PETG) with a 1.75 mm diameter and a material density of 1270 kg/m³, this filament delivers consistent extrusion, good layer adhesion and balanced mechanical properties suitable for functional parts and visual models. The product is compatible with 3D Systems printers and meets REACH and RoHS standards for regulated substances and hazardous materials.

Advantages

PETG combines the ease of printing of PLA with improved toughness and chemical resistance. This Gembird filament offers dimensional consistency on the 1.75 mm diameter, reduced warping compared with some engineering plastics, and reliable feeding on standard extruders. The green colour provides stable pigmentation for aesthetic parts and prototypes while the 1 kg spool size supports small to medium print runs without frequent spool changes.

Suitable for

• Prototypes and concept models requiring visible colour
• Functional parts that need impact resistance and moderate chemical resistance
• Household items and mounting brackets printed for durability
• Educational and hobbyist projects with 3D Systems-compatible equipment

Key specifications

• Material: Polyethylene Terephthalate Glycol (PETG)
• Filament diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: Green
• Material density: 1270 kg/m³
• Regulatory compliance: REACH, RoHS

How to use

Load the filament onto a compatible 3D Systems printer or any FFF printer that accepts 1.75 mm filament. Use recommended PETG print settings for temperature, bed adhesion and cooling: set nozzle temperature according to your printer and material guidelines, enable a heated bed to reduce warping, and use moderate part cooling. Ensure the filament path and extruder are free from debris before printing and perform a test print to confirm extrusion flow and first-layer adhesion.

Recommendations

Store the spool in a dry place or sealed container with desiccant to avoid moisture uptake. For best results, calibrate extrusion multiplier and retraction settings when switching to this PETG filament, and apply suitable bed adhesion aids (e.g., glue stick or PEI sheet) if needed.