Hypertec 808312 Black 5 m C7 Coupler CEE7/16

The C7 Coupler Hypertec 808312 Black 5 m is a 5-meter power cable designed to connect devices with a C7 receptacle to mains outlets using a CEE7/16 plug. The cable supports an input current of 10 A and features a black jacket for discreet placement. Its extended length provides flexibility for device positioning in home or office environments while maintaining a straightforward single-conductor power connection between equipment and the power source.

Advantages

This power cable offers a standard C7 coupler and CEE7/16 connector pair compatible with many consumer electronics, enabling quick and direct connection to mains sockets. The 5 m length reduces the need for additional extension accessories and allows greater placement freedom for devices. Rated for 10 A input current, the cable is suitable for a variety of low- to moderate-power appliances. The black finish and durable construction provide a practical, unobtrusive solution for both temporary and permanent setups.

Suitable for

Key specifications

How to use

Insert the CEE7/16 plug into a compatible mains socket and attach the C7 coupler to the device’s C7 inlet. Ensure both connectors are fully seated and that the cable is routed to avoid sharp bends or contact with heat sources. Confirm the device’s power requirements do not exceed the cable’s 10 A rating before use. Disconnect by removing the plug from the mains and the coupler from the device when powering down or before maintenance.

Recommendations

Do not use the cable with devices that require a higher current than 10 A. Avoid running the cable under carpets or through doorways where it may be pinched. Inspect connectors and the insulation periodically for signs of wear or damage; replace the cable if any damage is found. For fixed installations, secure the cable to prevent tripping hazards and to maintain proper ventilation around connected equipment.