Hypertec 808352-HY Power Cable Black 5 m CEE7/7 C5 Coupler

The Hypertec 808352-HY power cable is a 5 m black mains lead with a CEE7/7 plug and a C5 coupler, rated for an input current of 10 A. Designed for stable AC power delivery, this cable provides extended reach between wall outlets and compatible devices such as laptop power bricks, small UPS units and some consumer electronics. The construction focuses on reliable conductivity and safe connection, suitable for home and office environments where a longer lead is required.

Advantages

The cable combines a widely used European CEE7/7 connector with a C5 coupler to support devices that accept the three-pin cloverleaf-style inlet. At 5 m length it allows flexible placement of equipment without relying on extension adapters. The 10 A input rating matches common portable electronics and power adapters, while the black finish integrates unobtrusively into most setups. The design emphasizes dependable electrical contact and straightforward installation.

Suitable for

Key specifications

How to use

Ensure both the power outlet and the connected device are compatible with the CEE7/7 plug and C5 inlet respectively. Insert the CEE7/7 plug firmly into a properly earthed mains socket and attach the C5 coupler to the device’s inlet until it seats securely. Avoid forcing connectors at unusual angles. Route the cable to prevent excessive bending, kinking or contact with sharp edges. Before use, check the cable for visible damage; do not use if the insulation or connectors are compromised.

Recommendations

For safe and reliable operation, use the cable within the 10 A rating and avoid permanent exposure to moisture or excessive heat. For devices with higher current requirements or specialised power inlets, verify compatibility before connecting. Periodically inspect the cable and connectors and replace the cable if wear or damage is detected.