InLine Patch Cable, Cat.6A, S/FTP, PE jacket, black, 3 m

InLine Patch cable Cat.6A S/FTP PE outdoor black 3m is a professional outdoor LAN patch cable with double S/FTP shielding (PiMf) and a UV-, oil- and water-resistant polyethylene (PE) jacket. The cable supports 10 Gigabit (10 Gbps) transmissions up to 500 MHz and is equipped with RJ-45 connectors with gold plating, making it suitable for outdoor IP and PoE/PoE+ video surveillance systems and for connections between switches, routers, hubs, network cards, print servers and other active or passive network devices in demanding and industrial environments.

Advantages

The double S/FTP shielding reduces electromagnetic interference and crosstalk, while the PE outer jacket provides protection against ultraviolet radiation, oil and moisture for reliable outdoor performance. Cat.6A specification and 10GBase-T support enable high-speed data transmission up to 10 Gbit/s at frequencies up to 500 MHz. Gold-plated RJ-45 connectors ensure stable contact and corrosion resistance.

Suitable for

• Outdoor IP and PoE/PoE+ video surveillance installations
• Connections between switches, routers and network hubs
• Data centres and server farm interconnects in outdoor or semi-outdoor areas
• Industrial network environments requiring durable outdoor cabling

Key specifications

• Standard: Cat.6A
• Shielding: S/FTP (PiMf) — overall braid with individually wrapped pairs
• Data rate: up to 10 Gbit/s
• Frequency: up to 500 MHz
• Length: 3 m
• Connectors: RJ-45 to RJ-45, gold-plated
• Jacket material: UV-, oil- and water-resistant polyethylene (PE)
• Colour: Black
• Cabling technology: 10GBase-T

How to use

Connect one RJ-45 end of the patch cable to the network port of your device (switch, router, camera, network card, etc.) and the other end to the corresponding port on the receiving device. Ensure connectors are fully inserted until the latch clicks. For PoE/PoE+ devices verify power and device compatibility before connecting. Route the cable along protective conduits or cable trays where possible to minimise mechanical stress and exposure.

Recommendations

For outdoor installations, install the cable with proper strain relief, avoid sharp bends and protect termination points from direct water ingress. Use weatherproof connectors or housings for long-term exposure. Verify the device and network port support 10GBase-T if full 10 Gbit/s throughput is required.