InLine SF/UTP Cat.5e Patch Cable Blue 7.5m

The InLine Patch Cable SF/UTP Cat.5e blue 7.5m is a 7.5-meter network patch cable designed for connecting switches, routers, sockets, patch panels and network cards with RJ45 ports. The cable uses SF/UTP (foil-braided over twisted pairs) shielding, supports Gigabit Ethernet (10/100/1000Base-T(X)) at frequencies up to 125 MHz, and is intended for reliable data transmission in home and office networks.

Advantages

SF/UTP shielding reduces electromagnetic interference and crosstalk compared with unshielded cables, improving signal integrity for Gigabit connections. RJ-45 connectors on both ends provide standardized connectivity and simple plug-and-play installation. The 7.5 m length offers flexibility for typical desk-to-switch and patch-panel routing while the blue jacket allows easy visual identification in cabling runs.

Suitable for

• Connecting computers, switches and routers in home and small office networks
• Patch panel and wall socket connections within structured cabling
• Gigabit Ethernet links (1 Gb/s) over short-to-medium distances

Key specifications

• Cable type: SF/UTP Cat.5e (shielded foil + braided overall)
• Length: 7.5 m
• Connectors: RJ-45 — both ends
• Supported standards: 10/100/1000Base-T(X)
• Maximum frequency: 125 MHz
• Colour: Blue
• Brand / MPN / EAN: InLine / 72575B / 4043718007929

How to use

Insert the RJ-45 plugs into the corresponding RJ45 ports on network devices (switch, router, network card or wall socket) until the plug clicks into place. Route the cable to avoid tight bends and mechanical strain; maintain separation from strong electrical noise sources where possible. For removal, depress the RJ-45 clip and pull the connector straight out.

Recommendations

Use this SF/UTP Cat.5e patch cable for indoor structured cabling and short to medium Gigabit links. Avoid outdoor exposure, prolonged direct sunlight, and temperatures outside the device specifications. For environments with severe interference or higher bandwidth needs, consider higher-category shielded cables (e.g., Cat6a) if required.