InLine speaker cable 2x 2.5mm² CCA transparent 100m

Speaker Cable InLine 2x 2.5mm² CCA transparent 100m is a two-conductor speaker cable with 2.5 mm² Copper-Clad Aluminium (CCA) conductors and a transparent outer sheath. With a total length of 100 meters, this InLine cable is intended for low-voltage audio signal transmission between amplifiers and loudspeakers in standard consumer and professional audio setups. Note: this cable is not approved for use with 100 V public address (electroacoustic) systems.

Advantages

The cable provides a cost-effective combination of conductivity and reduced weight due to its CCA construction, and its 2.5 mm² conductor size supports stable speaker connections over longer runs. The transparent sheath allows discreet routing and visual inspection of the cable, and the 100 m reel reduces the need for joints in continuous installations.

Suitable for (tasks / use cases)

• Connecting amplifiers to passive loudspeakers in home and professional audio systems
• Long runs where a single 100 m reel is needed
• Installations requiring discreet cable routing or visual matching with surroundings

Key specifications

• Type: Speaker cable, 2 conductors
• Conductor: Copper-Clad Aluminium (CCA)
• Conductor size: 2 x 2.5 mm²
• Length: 100 m
• Colour: Transparent
• Brand: InLine
• MPN: 98300T
• EAN: 4043718128013

How to use

Cut required length from the 100 m reel and strip insulation from each conductor according to the connector or terminal requirements. Observe correct polarity when connecting to amplifier and speaker terminals to maintain phase integrity. Use suitable cable clamps or clips to secure the cable along routes and avoid tight bends that could stress conductors.

Recommendations

Do not use this speaker cable for 100 V electroacoustic (ELA) systems or mains voltage applications. For long-distance or high-power professional installations, verify that CCA conductors meet the required power and loss specifications compared with pure copper alternatives.