InLine temperature sensor / probe universal 2-pin with cable 1 m

The InLine Temperature Sensor Probe universal 2 Pin with Cable 1m is an NTC-based temperature sensor designed for general-purpose use. It measures temperatures from -50 to 90 °C and comes with an attached 1 m cable and a universal 2-pin connector for straightforward integration into compatible systems.

Advantages

The probe offers a wide measurement range from -50 to 90 °C and uses an NTC sensing element for stable temperature-dependent resistance changes. Its 1 m pre-attached cable and universal 2-pin connector simplify installation and replacement. The compact probe design allows use in confined spaces and in varied detector and sensor applications.

Suitable for

Key specifications

How to use

Position the probe so the sensing element is exposed to the medium or air whose temperature you need to monitor. Connect the universal 2-pin connector to the corresponding input on your control unit or detector, ensuring correct polarity if required by the device. Route the 1 m cable away from heat sources and moving parts. After connection, verify readings via the host device and allow a short stabilization period for accurate measurement.

Recommendations

For reliable operation, avoid submerging the connector in liquids and protect the cable from sharp bends and mechanical stress. Use the probe within the specified -50 to 90 °C range and follow the host equipment manufacturer’s wiring and installation guidelines.