Inter-Tech 88885232 Drive Bay 2x 2.5 inch Bezel Panel

These 3.5-inch to 2.5-inch mounting frames allow installation of one or two 2.5" HDD or SSD into a free internal 3.5" drive bay. The frames fit into a standard 3.5" slot and provide secure support and alignment for 2.5" drives when additional drive space in a desktop or server chassis is required.

Advantages

The adapter enables adding one or two 2.5" hard drives or solid-state drives without modifying the chassis. It saves space by using an existing 3.5" bay, ensures stable mounting and proper alignment of drive connectors, and is compatible with standard 3.5" bays and 2.5" drives.

Key specifications

• Form factor: installs into a 3.5" internal drive bay
• Supports: one or two 2.5" HDD or SSD
• Compatibility: standard 3.5" bays and 2.5" drive sizes
• Mounting: internal tool-assisted or screw mounting (depends on chassis)

How to use

Install the adapter into an available internal 3.5" bay according to chassis instructions. Secure the frame with screws or tool-less clips as provided by your case. Mount one or two 2.5" drives into the adapter, align the connectors toward the rear of the case, and fasten the drives with screws. Connect power and data cables to each drive and verify detection in the system BIOS or operating system.

Recommendations

Ensure your case has a free internal 3.5" bay and that you use correct-length screws; check drive clearance and cable routing before final assembly.