Interface Card Inter-Tech SLPS016 PCI Blue Grey

The Inter-Tech SLPS016 PCI Blue Grey is an internal interface card with a PCI host interface, designed to fit standard PCI slots in desktop systems. Its blue and grey color scheme identifies the model visually while the PCB and connectors are manufactured to match industry mechanical and electrical standards. The card provides a straightforward expansion option for systems that require additional legacy PCI connectivity without altering the host system's core architecture.

Advantages

The card offers a compatible PCI host interface for easy installation into existing motherboards, enabling expansion of I/O or peripheral connectivity where PCI support is required. Its internal design ensures direct board-to-board communication with the system bus, resulting in low-latency signal transfer and stable electrical connections. The blue and grey finish helps with visual identification during system assembly or maintenance.

Key specifications

• Interface type: PCI host interface compatible with standard PCI slot
• Form factor: internal expansion card for desktop PC installation
• Finish: blue and grey color scheme
• Compatibility: designed for motherboards supporting legacy PCI bus
• Electrical: conforms to standard PCI signaling and mechanical dimensions

How to use

Power down the PC and disconnect mains power before installation. Open the computer chassis following the manufacturer’s instructions, locate an available standard PCI slot, and carefully insert the Inter-Tech SLPS016 card until the edge connector seats fully. Secure the card to the chassis with the appropriate screw or retention mechanism, reassemble the case, and reconnect power. On power-up, allow the operating system to detect the new hardware and install any required drivers or system updates to enable full functionality.

Recommendations

Ensure motherboard BIOS and operating system support for legacy PCI devices before installation. Handle the card by its edges and use anti-static precautions to avoid damage to electronic components. For stable operation, install the card in a system with adequate cooling and avoid placing it adjacent to high-temperature components.