Konica Minolta Actuator

Precision motion control inside Konica Minolta devices demands an actuator that delivers consistent, repeatable positioning without drift or failure. The A0ED820702 stepper motor actuator meets that need with a bipolar 2-phase design, 1.8° step angle, and an integrated incremental encoder for closed-loop feedback. Whether it is guiding paper through the path, positioning the print head, or adjusting optical components, this actuator keeps operations smooth and accurate.

Who is it for

Service technicians and MRO teams maintaining Konica Minolta printers, copiers, and multifunction devices. It is also suitable for OEM integrators building custom automation systems that require a compact, flange-mountable stepper actuator with encoder feedback.

Main features

• Integrated incremental encoder with 1000 CPR resolution for precise position verification
• 2-phase bipolar stepper motor, 200 steps per revolution (1.8° step angle)
• Holding torque of 0.15 Nm ensures stable positioning under load
• 24V DC operating voltage, 1.2 A rated current, Class B insulation
• Front flange mount with 4x M3 holes for secure installation
• D-cut shaft, 4 mm diameter, 300 mm lead wires with 6-pin JST-XH connector
• IP20 protection rating, operating temperature 0°C to 50°C

Specifications

• Actuator type: Stepper Motor Actuator
• Operating voltage: 24V DC
• Rated current: 1.2 A
• Step angle: 1.8° (200 steps/revolution)
• Holding torque: 0.15 Nm (15 Ncm)
• Feedback mechanism: Integrated incremental encoder
• Encoder resolution: 1000 CPR (counts per revolution)
• Connection interface: 6-pin JST-XH connector
• Operating temperature range: 0°C to 50°C
• Mounting type: Front flange mount (4x M3 holes)
• Shaft type: D-cut, 4 mm diameter
• Number of phases: 2-phase bipolar
• Insulation class: Class B
• Lead wire length: 300 mm
• Protection rating: IP20
• Typical application: Paper path control, print head positioning, optical component adjustment in Konica Minolta devices

Tips

Always disconnect power before installation. Verify the JST-XH connector orientation matches the control board. For optimal performance, keep the actuator within the specified temperature range and avoid exposure to dust or liquids beyond IP20 limits.