KWB 511300 Polishing Pad 1 Pc.

The KWB 511300 polishing pad is a felt polishing wheel designed to attach to the arbor of standard electric and cordless drills. It is intended for applying polishes and waxes to surfaces such as wood, metal, plastics, marble, glass, acrylic and for car refinishing, providing a smooth finish when used with appropriate polishing compounds.

Advantages

This felt polishing wheel offers compatibility with common drill arbors, a dense felt surface for even application of polishes and waxes, and suitability for a wide range of materials. It is a single-piece accessory from KWB that supports both professional and DIY polishing tasks without requiring specialized machines.

Suitable for

Key specifications

How to use

Secure the polishing pad onto the drill arbor according to the drill manufacturer’s instructions. Select a suitable polishing compound or wax for the target material, apply a small amount to the felt surface or directly to the workpiece, and run the drill at low to moderate speed while keeping the pad flat against the surface. Move the pad evenly across the workpiece to avoid concentrated heat or uneven wear. Inspect the surface and repeat with finer polish if a higher sheen is required.

Recommendations

Use appropriate safety equipment such as eye protection and gloves, test the polish on an inconspicuous area first, avoid excessive pressure and high speed to prevent damage or overheating, and clean or replace the pad when heavily saturated with compound.