Lanberg PLU-6000EZ RJ-45 cable connector

Set of 100 transparent unshielded pass-through RJ-45 (8P8C) Cat6 wire connectors designed primarily for UTP LAN cables. The Lanberg PLU-6000EZ connectors use a triple-tooth (3-prong) contact design that accommodates both solid and stranded Ethernet conductors, allowing use in long-distance structured cabling as well as short patch cords.

Advantages

Transparent pass-through design enables visual verification of conductor order during termination. Triple-tooth contacts ensure reliable electrical contact with both solid and stranded wires. Pack of 100 provides an ample supply for installations and repairs. Compatible with Cat6 UTP cables and produced by LANBERG, model PLU-6000EZ.

Suitable for

Key specifications

How to use

Prepare the Cat6 UTP cable by stripping the outer jacket to expose the four twisted pairs. Untwist pairs and align conductors in the desired wiring standard (T568A or T568B). Insert the wires fully through the pass-through RJ-45 connector so each conductor is visible at the front. Use an appropriate crimping tool designed for pass-through RJ-45 connectors to crimp the plug onto the cable, securing the contacts and cutting the excess conductor ends if the tool does not trim them automatically.

Recommendations

For reliable terminations, use a quality pass-through crimping tool and follow a consistent wiring standard (T568A or T568B). Verify pair order visually before crimping and test the terminated cable with a network cable tester to confirm continuity and correct pinout.