Lanview LVN-CAT6A-FLEX-2M Network Cable Black S/FTP (S-STP)

The Lanview LVN-CAT6A-FLEX-2M is a high-flexibility Cat6a patch cable designed for demanding network environments. At 2 meters length and finished in black, it supports data transmission up to 10 Gbit/s and bandwidth up to 500 MHz. The cable uses S/FTP shielding and 50µ" gold-plated RJ45 connectors to provide stable connections and improved resistance to interference.

Advantages

S/FTP shielding reduces electromagnetic and radio-frequency interference, improving signal integrity in crowded cable environments. The 50µ" gold-plated RJ45 contacts offer better conductivity and increased durability. The high-flex jacket and construction are suitable for installations that require frequent movement or tight bends while maintaining Cat6a performance.

Suitable for

• 10 Gbit/s Ethernet links in server rooms and data centres
• High-bandwidth desktop and workstation connections
• Patch panels and switch-to-switch connections within racks
• Environments with dense cabling or potential EMI sources

Key specifications

• Standard: Cat6a
• Length: 2 m
• Shielding: S/FTP (overall braid + individually foil screened pairs)
• Maximum data rate: 10 000 Mbit/s
• Bandwidth: up to 500 MHz
• Connector: RJ45 with 50µ" gold-plated contacts
• Colour: Black
• Weight: 0.04 kg

How to use

Connect one RJ45 end of the Lanview LVN-CAT6A-FLEX-2M to the network device (switch, router, network card) and the other end to the target device or patch panel. Ensure connectors are fully inserted until the latch clicks. Avoid sharp bends and excessive pulling on the cable; maintain bend radius recommended for Cat6a cables when routing through racks or trays.

Recommendations

For optimal performance, route the cable away from strong electrical sources and large power cables to minimise interference. Use appropriate cable management in racks and patch panels to prevent stress on connectors and preserve the S/FTP shielding integrity.