2.75 €
Ex Tax:2.33 €
2.75 €
Ex Tax:2.33 €
Brand: CONNECT
Stock: 158
Allows the connection of LED strips with controller.Dimension: 160 mm..
7.57 €
Ex Tax:6.42 €
Brand: V-TAC
Stock: 20
V-TAC Connector, LED Strip 3528 Cross Type (V3509)Manufacturer: V-TACModel: V3509Size: 8 mm..
2.23 €
Ex Tax:1.89 €
Brand: V-TAC
Stock: 19
V-TAC Connector, LED Strip 5050 Cross Type (V3510)Manufacturer: V-TACModel: V3510RGB, 10 mm, with sockets..
2.23 €
Ex Tax:1.89 €
Brand: V-TAC
Stock: 8
V-TAC Connector, LED Strip 5050 L Type (V3511)Manufacturer: V-TACModel: V3511RGB, 10 mm, with sockets..
2.23 €
Ex Tax:1.89 €
Brand: DESIGN LIGHT
Stock: 50
6-point distributor with MINI plug L813A 6-point splitter with MINI sockets L813 on a 15cm long cable, terminated with a mini connector plug L813.MINI..
2.75 €
Ex Tax:2.33 €
Brand: CONNECT
Stock: 11
Allows the angular connection of two LED strips.Dimension: 160 mm..
5.06 €
Ex Tax:4.29 €
Showing 1 to 6 of 6 (1 Pages)
Lighting
LED strip connectors: join and extend LED strips without soldering
Connectors for joining and extending LED strips without a soldering iron. They clip onto the strip contacts, so you can lengthen a run, link two strips or turn a corner. The range covers straight, corner (L type) and cross (plus) type connectors, plus strip-to-strip joiners, some with a short wire lead. Match the connector to your strip: single-colour, RGB (colour) or CCT (tunable white), in common widths of 8 mm and 10 mm and chip sizes 3528 and 5050, from makers such as LEMLUX and V-TAC.
6 products3 brandsStraight, corner and cross connectorsVia official distributors
How to choose
Solder-free joining
LED strip connectors clip onto the copper contacts at the end of a strip, so you can join or extend LED strips without a soldering iron. Use them to lengthen a run, link two strips across a gap or add a turn. Some have a short wire lead; others join strip to strip.
Straight, corner and cross shapes
Straight connectors continue a strip in a line. Corner, or L type, connectors turn it around a corner. Cross, or plus, type connectors split a run into several directions. Pick the shape for the way your strip needs to run.
Match the strip type and width
Match the connector to your strip. Single-colour, RGB (colour) and CCT (tunable white) strips need the right contacts, so the colours and white tones line up. Strips also come in different widths, commonly 8 mm and 10 mm, so pick the matching width.
Chip sizes 3528 and 5050
LED strips are built around chip sizes such as 3528 and 5050. Choose a connector made for your strip chip size and width, so the contacts meet the pads and clip on firmly.
What you will find here
Leading brands
LEMLUXV-TAC
Match the connector to your strip: Pick a connector that fits your strip. First match the width, commonly 8 mm or 10 mm, and the chip size, such as 3528 or 5050. Then match the type: single-colour, RGB (colour) or CCT (tunable white) strips need the right contacts. For a turn choose a corner (L type) connector; to continue in a line choose a straight one.
Frequently asked questions
Can I join LED strips without soldering?
Yes. LED strip connectors clip onto the copper contacts at the cut end of a strip, so you can join or extend LED strips without a soldering iron. Line up the contacts, close the connector and the strip is joined.
How do I pick the right connector?
Match it to your strip width and type. Measure the strip width, commonly 8 mm or 10 mm, and note the chip size, such as 3528 or 5050. An RGB (colour) strip needs a connector with more contacts, while a CCT (tunable white) strip needs the right contacts for its white tones.
Straight or corner connector?
Use a straight connector to continue a strip in a line or link two strips across a short gap. Use a corner, or L type, connector to turn around a corner without bending the board. To split a run into several directions, use a cross, or plus, type connector.