Lindy 15m Cat.6 U/UTP Network Cable, Yellow

Lindy 15m Cat.6 U/UTP Network Cable Yellow is a 15-metre unshielded Cat.6 Ethernet cable designed for data transmission at frequencies up to 250 MHz. The cable supports Gigabit Ethernet (10/100/1000Base-T) with RJ-45 connectors on both ends and is packaged individually in a polybag. The bright yellow jacket makes the cable easy to identify in installations.

Advantages

The Cat.6 U/UTP construction delivers the required electrophysical parameters (NExT, FExT and others) for reliable Gigabit performance despite the absence of shielding. Gold-plated contacts provide corrosion-resistant connections and consistent signal transfer over long periods. A snagless strain-relief design protects the connector latch during installation and removal, reducing the risk of damage.

Suitable for

• Wired LAN connections for desktops, laptops and servers
• Gigabit Ethernet networks (10/100/1000Base-T)
• Patch panels and wall outlets in office and home environments
• Cable runs where easy identification is required (yellow jacket)

Key specifications

• Category: Cat.6 U/UTP
• Bandwidth / freq.: up to 250 MHz
• Length: 15 m
• Connectors: RJ-45 to RJ-45
• Cabling technology: 10/100/1000Base-T(X)
• Colour: Yellow
• Contacts: Gold-plated
• Packaging: individually polybagged

How to use

Connect one RJ-45 plug to your network device (switch, router, PC) and the other plug to the corresponding port. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid tight bends and protect it from crushing or sharp edges. For best performance, keep the cable separated from strong electromagnetic sources and avoid running it parallel to power cables for long distances.

Recommendations

For stable Gigabit performance, use in structured cabling installations and avoid exceeding recommended bend radius. Replace if the connector latch is damaged to maintain reliable contact.