Lindy 30m Cat.6 U/UTP Network Cable, White

Network Cable Lindy 30m RJ-45 Cat6 White is a 30-metre Cat.6 U/UTP PVC cable designed for Ethernet networks with support for bandwidths up to 250 MHz. The cable features RJ-45 connectors on both ends with gold-plated contacts and a snagless strain relief to protect the connector latch during installation and removal. It is manufactured and tested to ISO/IEC 11801 and packaged individually in a polybag.

Advantages

The Cat.6 design provides performance for operating frequencies up to 250 MHz and supports Gigabit Ethernet (10/100/1000Base-T) despite being unshielded (U/UTP) due to optimized electrophysical parameters. Gold-plated contacts resist corrosion and maintain reliable connections over time. The snagless connector design reduces the risk of latch damage during handling. The cable’s white PVC jacket offers a clean appearance suitable for visible installations.

Suitable for

• Wired Gigabit Ethernet connections (10/100/1000Base-T)
• Home and office network cabling
• Connecting switches, routers, PCs and networked devices
• Runs where a 30 m cable length is required

Key specifications

• Standard: Cat.6 (ISO/IEC 11801 compliant)
• Cabling type: U/UTP (unshielded)
• Bandwidth / frequency: up to 250 MHz
• Length: 30 m
• Connectors: RJ-45 to RJ-45, gold-plated contacts
• Colour: White
• Supports: 10/100/1000Base-T (Gigabit Ethernet)

How to use

Connect one RJ-45 connector to your network device (switch, router, PC) and the other connector to the corresponding port on the second device. Ensure both ends are fully inserted until the connector latch clicks to secure the connection. Route the cable avoiding sharp bends and excessive tension; the snagless strain relief helps protect the latch but does not replace careful cable management.

Recommendations

For best performance, avoid running the cable in close parallel with mains power lines and keep bend radius within manufacturer guidance. Use appropriate cable management and fixation to prevent stress on connectors and to maintain signal integrity for Gigabit Ethernet.