Lindy 7.5m Cat.6 U/UTP Network Cable, Yellow

The Lindy 7.5m RJ-45 Cat6 Yellow is a Cat.6 U/UTP PVC network cable designed for data transmission at operating frequencies up to 250 MHz. It features RJ-45 connectors with gold-plated contacts and a snagless strain relief design. The cable is manufactured and tested according to ISO/IEC 11801 and is delivered individually packaged in a polybag.

Advantages

The gold-plated contacts provide corrosion-resistant connections and stable signal transfer for Ethernet standards up to 1GBase-T. The U/UTP unshielded design, combined with optimized electrical parameters, supports Gigabit Ethernet performance despite the absence of shielding. The snagless strain relief protects the connector latch during installation and removal, reducing the risk of physical damage.

Suitable for

• Wired Gigabit Ethernet connections (1GBase-T)
• Office and home network cabling where a visible colored cable is preferred
• Connecting switches, routers, PCs and networked devices over distances up to 7.5 m

Key specifications

• Cable category: Cat.6 U/UTP
• Frequency support: up to 250 MHz
• Length: 7.5 m
• Connectors: RJ-45 to RJ-45
• Contacts: gold-plated
• Sheath material: PVC
• Compliance: ISO/IEC 11801
• Color: Yellow

How to use

Connect one RJ-45 connector to the network device (switch, router or PC) and the other connector to the corresponding port. Ensure connectors click into place and that the snagless strain relief is not bent sharply. Route the cable to avoid tight bends and mechanical stress; keep it away from strong electromagnetic sources where possible to minimize potential interference.

Recommendations

For reliable Gigabit Ethernet performance, use this Cat.6 cable for runs up to 7.5 m in typical office or home environments. Avoid running the cable tightly alongside high-voltage power lines and keep bend radius within manufacturer guidelines.