LogiLink 2m Cat.6 S/FTP Network Cable

The LogiLink 2m Cat.6 S/FTP networking cable provides reliable high-speed data transmission for network connections. It features RJ45 connectors on both ends, a shielded S/FTP (PIMF) structure with bare copper conductors and an LSZH (low smoke zero halogen) jacket, meeting ISO/IEC 11801, EN50288 and TIA/EIA 568-B.2-1 standards. The 2 m length and blue color make it suitable for desktop and rack installations where a short, shielded patch cable is required.

Advantages

S/FTP shielding (overall foil plus individual pair shields) reduces electromagnetic interference and crosstalk, improving signal integrity in environments with multiple cables or electronic equipment. The AWG 27/7 bare copper conductors ensure adequate conductivity for Cat6 performance. The LSZH jacket limits smoke and toxic fumes in case of fire, making the cable suitable for indoor use where low-hazard materials are preferred. Compliance with recognized standards ensures predictable electrical and mechanical characteristics.

Suitable for

• Patch connections between switches, routers and wall outlets
• Office and data center copper networking requiring shielded Cat6 cables
• Short runs in environments with potential electromagnetic interference
• Desktop setups where a 2 m blue patch cable is convenient

Key specifications

• Category: Cat.6
• Length: 2 m
• Connectors: RJ-45 to RJ-45
• Construction: S/FTP (overall shield + foil per pair), PIMF
• Conductor: Bare copper, AWG 27/7
• Jacket: LSZH (low smoke zero halogen)
• Weight: 60 g
• Standards: ISO/IEC 11801, EN50288, TIA/EIA 568-B.2-1
• Colour: Blue

How to use

Connect one RJ45 plug to your network device (switch, router, NIC) and the other plug to the corresponding port on the patch panel or wall outlet. Ensure connectors are fully inserted until the latch clicks. Avoid tight bends and sharp kinks; maintain the manufacturer’s recommended minimum bend radius for Cat6 cables to preserve performance. For permanent installations, route the cable away from high-voltage power lines to minimise interference.

Recommendations

Use this LogiLink Cat.6 S/FTP cable for short patching runs where shielding is required. For long-distance links or where unshielded cabling is acceptable, consider appropriate alternatives (e.g., Cat6a or U/UTP) based on bandwidth and installation requirements.