LogiLink C6A123S 30 m Cat6a S/FTP black

The LogiLink C6A123S is a 30 m Cat6a S/FTP networking cable designed for reliable high-speed wired connections. It supports data rates up to 10 Gigabit Ethernet and transfer frequencies up to 500 MHz. The cable has shielded twisted pairs and an overall copper-braid shield, terminated with shielded RJ45 plugs and a slim overmoulded snagless strain relief. The halogen-free, flame-retardant jacket increases safety in enclosed installations.

Advantages

Supports 10GBase-T networks and frequencies up to 500 MHz for stable high-speed data transmission. S/FTP construction (individually shielded pairs plus overall braid) reduces electromagnetic interference and crosstalk. Halogen-free, flame-retardant outer jacket enhances fire safety and lowers toxic emissions. Slim overmoulded, snagless RJ45 connectors simplify routing in patch panels and tight spaces while maintaining shielding continuity.

Suitable for

• 10 Gigabit Ethernet backbones and links within data centers or comms rooms
• Office or home network connections between switches, patch panels and wall outlets
• High-bandwidth applications such as video streaming, large file transfers and virtualization

Key specifications

• Length: 30 m
• Standard: Cat6a
• Shielding: S/FTP (foil on each pair + overall copper braid)
• Connectors: RJ-45 to RJ-45 (shielded)
• Data rate: up to 10 Gigabit Ethernet
• Frequency: up to 500 MHz
• Colour: Black
• Jacket: halogen-free, flame retardant

How to use

Route the LogiLink C6A123S between network devices such as switches, patch panels and wall jacks, ensuring connectors are fully inserted into RJ45 ports until the latch clicks. Maintain bend radii recommended for structured cabling and avoid sharp kinks. For shielded installations, connect cable shields to properly grounded patch panels or chassis to preserve EMI protection.

Recommendations

For optimal performance, use the cable within structured cabling environments and avoid running it alongside unshielded power cables. Ensure proper grounding of the shield at one point to prevent ground loops and check connector seating periodically in high-traffic installations.