LogiLink Cat7 S/FTP 15 m Network Cable

LogiLink Cat7 S/FTP 15 m networking cable provides high-speed data transmission for home and office networks. The S/FTP design with individually foil-shielded pairs and an overall braid reduces electromagnetic interference, while RJ45 connectors with 50 µ gold plating ensure stable contact and corrosion resistance. The cable jacket is LSZH (halogen-free) for reduced smoke and toxic gas emission in case of fire. It is suitable for Gigabit and 10 Gigabit Ethernet applications and complies with common cabling standards for structured networks.

Advantages

The Cat7 S/FTP construction offers improved shielding performance compared with lower-category cables, minimising crosstalk and external interference. Gold-plated RJ45 plugs provide reliable connectivity and long-term contact stability. A halogen-free outer jacket reduces hazardous emissions and improves safety in enclosed environments. The 15 m length covers typical room-to-room or equipment-to-switch connections without additional couplers.

Suitable for

• High-bandwidth Ethernet (up to 10 Gbps) between devices and switches
• Home and office network cabling over short to medium runs
• Connections requiring reduced electromagnetic interference

Key specifications

• Cable category: Cat7, rated up to 600 MHz
• Shielding: S/FTP — overall braid with individually foil-shielded pairs
• Conductor: AWG 26/7 copper
• Connectors: RJ45 on both ends with 50 µ gold plating
• Jacket: LSZH (halogen-free), colour white
• Length: 15 m
• Standards: ISO/IEC 11801, EN 50173-1, TIA/EIA-568-B.2-1

How to use

Plug each RJ45 connector into the corresponding network ports on your devices, switches, or routers. Ensure connectors are fully seated until they click to establish a secure connection. Route the cable without tight bends and avoid running parallel to strong power sources to maintain signal integrity. For permanent installations, secure the cable along paths that prevent mechanical stress.

Recommendations

Use this Cat7 S/FTP cable for short to medium runs where high data rates and reduced interference are required. For best performance, avoid excessive bending and keep separation from high-voltage power lines; where outdoor or direct-burial use is needed, select a cable rated for those conditions.