LogiLink CP093 Power Cable 1.8m C5 Coupler CEE7/7

The LogiLink CP093 power cable is a 1.8 m black mains lead featuring a C5 coupler on one end and a CEE7/7 plug on the other. Designed for general power delivery, it supports standard mains voltages up to 250 V and rated currents of 10/16 A. The cable provides a straightforward, grounded connection for compatible laptops, small power bricks and other IEC C5-compatible equipment in home and office environments.

Advantages

This power cable offers a reliable mains connection with a compact C5 coupler that fits a range of small power adapters. The 1.8 m length balances placement flexibility and cable management. Rated for 250 V and 10/16 A operation, it meets common safety and performance requirements for consumer electronics. The black sheath provides a discreet appearance and modest wear resistance for everyday use.

Suitable for

• Powering laptops and notebook adapters with an IEC C5 inlet
• Connecting small external power supplies and chargers that accept a C5 coupler
• Home and office workstations where a grounded CEE7/7 mains plug is required

Key specifications

• Cable length: 1.8 m
• Connector A: C5 coupler (3-pin cloverleaf)
• Connector B: CEE7/7 mains plug (grounded)
• Rated input voltage: up to 250 V
• Rated input current: 10/16 A
• Colour: Black

How to use

Ensure the device to be powered uses an IEC C5 inlet before connecting. Insert the C5 coupler into the device’s inlet until it seats firmly, then plug the CEE7/7 end into a properly grounded mains socket. Verify that the socket voltage and available current are compatible with the connected device. Disconnect by gripping the connectors rather than pulling the cable, and store the lead coiled without sharp bends when not in use.

Recommendations

For safe operation, use the cable only with compatible equipment and within the stated voltage and current ratings. Avoid exposing the cable to moisture, extreme heat, or heavy mechanical strain. Inspect the connectors and sheath periodically for damage and replace the cable if the insulation or contacts appear worn or compromised.