LogiLink PCI Express PC0029A 1000 Mbit/s Network Card

The LogiLink PCI Express PC0029A 1000 Mbit/s network card provides wired Ethernet connectivity for desktop PCs via a PCI Express slot. Designed to deliver up to 1000 Mbit/s throughput, this gigabit adapter adds a physical RJ45 port to systems that need a reliable wired connection for high-bandwidth tasks.

Advantages

This PCI Express network card supports gigabit speeds to reduce latency and improve sustained transfer rates compared with older fast Ethernet adapters. The wired connection ensures stable performance for applications that are sensitive to packet loss and jitter. Installation occupies one PCI Express slot and integrates with standard desktop motherboards, allowing straightforward hardware-level network access without relying on USB ports.

Suitable for

• Online gaming where low latency and stable throughput are required
• Streaming high-definition audio and video
• Large file transfers and backup over a wired LAN
• Desktop PCs without built-in gigabit Ethernet or with a faulty onboard port

Key specifications

• Connectivity technology: Wired Ethernet
• Host interface: PCI Express (x1 compatible)
• Maximum data transfer rate: 1000 Mbit/s (Gigabit Ethernet)

How to use

Power off the PC and open the case following manufacturer safety guidelines. Insert the network card into an available PCI Express slot and secure it to the chassis. Close the case and power on the system. Install any required drivers supplied by the operating system or the manufacturer to enable the card. Once drivers are installed, connect an Ethernet cable from your router, switch, or modem to the card's RJ45 port and configure network settings in your operating system as needed.

Recommendations

For best results, use a Cat5e or higher quality Ethernet cable and connect the card to gigabit-capable network equipment. Keep the system drivers up to date and place the card in a PCI Express x1 or higher slot to ensure full compatibility and performance.