MEAN WELL GST60A24-P1J Power Supply

The MEAN WELL GST60A24-P1J is an industrial AC-DC desktop power adapter that delivers a fixed 24 V DC output at up to 2.5 A (60 W). It accepts a wide input voltage range of 90–264 V AC, complies with RoHS, and combines compact dimensions (50 mm width × 125 mm depth) with a lightweight design (approximately 320 g) for straightforward integration in industrial or consumer equipment. The adapter includes a 3-pole IEC320-C14 AC inlet and is supplied in packs of 40 units.

Advantages

The adapter provides a stable 24 V DC output with 2.5 A current capacity suitable for a variety of devices. Its wide AC input range supports global mains voltages without additional converters. RoHS compliance ensures it meets environmental restrictions. The compact and lightweight form factor simplifies installation into desktop or enclosure-mounted applications while the IEC320-C14 inlet enables standard AC connections.

Suitable for

• Industrial control modules and instrumentation
• Network and communication equipment
• Desktop electronics and small appliances
• Embedded systems and development platforms

Key specifications

• Manufacturer: mean well
• Model (MPN): GST60A24-P1J
• Output: 24 V DC, 2.5 A (60 W)
• Input voltage: 90–264 V AC
• AC inlet: 3-pole IEC320-C14
• RoHS: compliant
• Dimensions: 50 mm (W) × 125 mm (D)
• Weight: approx. 320 g
• Pack quantity: 40 units per pack

How to use

Connect the adapter to the mains supply using a compatible IEC320-C13 power cord and plug the DC output connector into the device requiring 24 V DC. Ensure the connected device draws no more than 2.5 A. Mount the adapter on a stable, well-ventilated surface and avoid blocking airflow around the unit. Verify polarity and connector compatibility before powering the load.

Recommendations

Use the adapter within its specified input and output ratings; avoid exposure to moisture, excessive dust, or temperatures outside the manufacturer’s recommended range. For long-term reliability, allow adequate ventilation and periodically inspect connections and cabling for wear.