Media-Tech MT5701 Doorbell Set Black

KINETIK DOORBELL MT5701 is a battery-free wireless doorbell kit including an indoor plug-in chime unit and an outdoor kinetic push button. The button converts the mechanical pushing force into electricity, so no batteries are required. The wireless range reaches up to 150 m and the receiver plugs into a standard mains socket (input voltage 110–250 V). The button housing has an IP44 rating for protection against solid objects and water splashes.

Advantages

The Media-Tech MT5701 eliminates the need for batteries by using kinetic energy from each press, reducing maintenance. Its wireless connection offers installation without cables, and the compact receiver is powered directly from the mains. The outdoor button’s IP44 protection ensures suitability for exposed mounting near doors or gates. Operation at 433.92 MHz and a sound level of 85 dB provide reliable signalling over typical home distances up to 150 metres.

Suitable for

• Private homes and apartments where a battery-free wireless doorbell is preferred
• Entrances, gates and porches where IP44 protection is required
• Locations needing a simple plug-in receiver without wiring
• Situations where low maintenance and easy installation are important

Key specifications

• Model: Media-Tech MT5701 (KINETIK DOORBELL MT5701)
• Frequency: 433.92 MHz
• Range: up to 150 m (open area)
• Volume: 85 dB
• Receiver power: mains input 110–250 V (plug-in)
• Receiver dimensions (W×D×H): 5.0 × 6.1 × 9.1 cm
• Button protection: IP44 (suitable for outdoor use)
• Power source: kinetic (no batteries)
• MPN: MT5701; EAN: 5906453157016

How to use

Mount the kinetic push button in a visible, accessible position at the door or gate using the supplied screws or adhesive, ensuring the housing faces outward and the mounting location is within the stated wireless range. Plug the receiver into a nearby mains socket within the building. Press the button to generate power and transmit the signal to the receiver; the chime will sound. No wiring or battery installation is required.

Recommendations

For reliable operation, install the button where it will not be obstructed and within 150 m of the receiver in open conditions. Avoid placing the receiver behind large metal objects or inside metal cabinets, and mount the button so water cannot pool on the surface despite its IP44 rating.