Memory module HPE DDR4 64 GB 3200 MHz ECC

The HPE P21676-001 Memory Module is a 64 GB DDR4 DIMM designed for enterprise servers and workstations. With a 288-pin form factor, ECC support and a 3200 MHz clock speed, this module targets environments where capacity, stability and data integrity are required. CAS latency is 22 and the module operates at 1.2 V, providing compatibility with systems that support DDR4 3200 ECC memory.

Advantages

This 64 GB DDR4 memory module delivers high capacity and error-correcting code (ECC) support to reduce the risk of data corruption in server workloads. The 3200 MHz clock speed offers improved memory bandwidth for multi-threaded applications, while the 288-pin DIMM form factor ensures compatibility with standard DDR4 server memory slots. Low operating voltage helps maintain power efficiency in dense server configurations.

Key specifications

• Capacity: 64 GB
• Memory type: DDR4
• Clock speed: 3200 MHz
• Form factor: 288-pin DIMM
• CAS latency: 22
• Operating voltage: 1.2 V
• ECC: supported

How to use

Power down the server or workstation and disconnect it from power before installing the memory module. Locate the appropriate DDR4 DIMM slot on the motherboard, open the retaining clips, and align the module with the slot key. Firmly press the module into the slot until the clips lock. Reconnect power and start the system to verify that the new memory is recognized in firmware/BIOS and by the operating system. For systems with multiple modules, install memory according to the motherboard vendor's channel population guidelines.

Recommendations

Use the HPE 64 GB DDR4 3200 MHz ECC module in matched pairs or in configurations recommended by your server vendor to ensure optimal channel performance and stability. Verify BIOS/firmware compatibility and update system firmware if necessary to support DDR4 3200 ECC operation.